Dr. Ayorinde Joseph Olanipekun is a Senior Lecturer in the Department of Electrical and Electronics Engineering, College of Engineering, Federal University of Agriculture, Abeokuta (FUNAAB), Nigeria. He obtained the Doctor of Philosophy (Ph.D.) degree in Electronics and Control Systems Engineering in 2023 and the Master of Engineering (M.Eng.) degree in Electrical and Electronics Engineering in 2013 from FUNAAB. He earned the Bachelor of Engineering (B.Eng.) degree in Electrical/Electronics Engineering from the University of Ado-Ekiti, Nigeria, in 2000. He is a registered Engineer with the Council for the Regulation of Engineering in Nigeria (COREN) and a member of the Nigerian Society of Engineers (NSE), the Nigerian Institute of Electrical and Electronics Engineers (NIEEE), and the International Association of Engineers (IAENG).
Dr. Olanipekun has over twenty-five years of experience in engineering practice, teaching, research, laboratory management, innovation, and community service. His research interests span Electronics, Control Systems and Instrumentation Engineering, with emphasis on intelligent control systems, renewable energy technologies, electrical machines, embedded systems, automation, artificial intelligence, Internet of Things (IoT), smart energy management, and engineering system design.
His research has produced innovative technologies, including smart metering systems, intelligent monitoring devices, renewable energy-powered systems, robotic platforms, and automated measurement instruments. He is a co-inventor of the patented Automated Non-Invasive Animal Measuring Device (ANiMeDRig) for livestock management. His work has attracted support through Institution-Based Research (IBR) grants and the TETFund Alliance for Innovative Research (TETFAIR) programme.
Dr. Olanipekun contributes actively to undergraduate and postgraduate supervision, academic administration, innovation, and industry collaboration. His scholarly outputs include journal articles, conference papers, patents, and research projects in control systems, renewable energy, intelligent systems, instrumentation, automation, and smart engineering applications.
For further inquiries or collaboration opportunities, Dr. Olanipekun can be contacted via email at olanipekunaj@funaab.edu.ng or ayorindelanny@yahoo.com
Educational Institutions Attended (with dates)
a. Federal University of Agriculture, Abeokuta 2016 to 2023
b. Federal University of Agriculture, Abeokuta 2010 to 2013
c. University of Ado-Ekiti, Ekiti State, Nigeria 1994 to 2000
d. St. Peter’s Unity Secondary School, Akure, Ondo State, Nigeria 1988 to 1993
(a) Completed (starting with latest).
1. Analysis of a controlled self-excited induction generator
2. Development of an automatic safe weight of lift monitoring device.
3. Development of an RIFD device for transportation system management
4. Development of smart meter for demand side management of energy.
5. Development of a solar powered vulcanizing machine
6. Development of a voltage controlled muti-output battery charger
7. Development of a solar powered lawn cutting machine
(b) In progress (list).
1. Development of a non-invasive poultry welfare measuring device
a. TETFund Institution Based Research (IBR) Intervention Grant 2025
b. Certificate of Registration of Patent, for an invention titled Automated Non-invasive digital Animal Monitoring Device 2024
c. TETFund alliance for Innovative Research(TETFAIR),in collaboration with Innov8 Hub Abuja 2024
d. TETFund Institution Based Research (IBR) Intervention Grant 2023
1. Corporate Member, Nigerian Society of Engineers
2. Nigeria Society of Electrical and Electronic Engineer (NIEEE)
a. Fourth International Conference of College of Engineering tagged CEIC 2026, Federal University of Agriculture, Abeokuta, Nigeria, 28th – 30th April, 2026. Paper: (1) Correlation Studies of a Multi-Sensor Data for Induction Motor Health Assessment, (2) Development of an Automatic Liquefied Petroleum Gas Leakage Detection and Control System.
b. 2nd Asia Pacific Conference on Innovation in Technology (APCIT 2025), Vidyavardhaka College of Dependency Engineering, Mysuru, India, and IEEE, Bangalore, 19th–20th , September 2025. Paper: (1) Multi-Lingual Contextual Audio Transcription and Translation to Selected Native Languages.
c. Sixth Annual Conference of School of Engineering and Engineering Technology tagged SEET 2023, Federal University of Technology Akure, Ondo State, Nigeria, 7th -9th November, 2023. Paper: Development of an Internet of Things Based Heart Rate Monitoring System.
d. International Conference and exhibition on Power and Telecommunication (ICEPT). Nigerian Society of Electrical and Electronic Engineers, 10-14 October, 2022. Paper: (1) Characteristic Behaviour of Induction Machines Used for Electricity Generation.
e. Third International Conference of College of Engineering, Federal University of Agriculture, Abeokuta, Nigeria, May 24-26, 2021. Paper: (1) Development of an Automatic Safe Weight of Lift Monitoring Device (2) Development of a Demand Side Smart Energy Control Meter..
f. Second International Conference of College of Engineering, Federal University of Agriculture, Abeokuta, Nigeria, May 14-17, 2018. Paper Read: (1) Modeling and real time performance study of photovoltaic array (2) Parameters extraction of a double diode model of photovoltaic cell using Newton Raphson method.
g. First International Conference of College of Engineering, Federal University of Agriculture, Abeokuta, Nigeria, March 7-11, 2016. Paper: (1) 1.Two Level Verification Vault Access Control Systems..(2) Identification of Intrinsically Functional Passive Electronic Components Using Visualization Tool.
h. Fourth International Conference on Engineering Research and Development (ICERD2012), University of Benin, Nigeria, September 4-6, 2012. Development of Human-Computer Interaction Device for Measurement of Passive Components.
i. Adebisi O.A., Nuga O.O., Ogundare A.B., Raji A.A., Olanipekun A.J., Olaogun P.O. and Bamkole A.S. (2026). Development of an Internet of Things Based Heart Rate Monitoring System. Engineering Headway, 33: 221-235. Published by Trans Tech Publications Ltd. Available online at https://doi.org/10.4028/p-Ini9lW
ii. Badejo A.A., Nkeshita F. C., Olanipekun A. J., Bada B. S., Adekunle O.D. and Ndambuki J.S. (2025). Evaluating the performance of an electrocoagulation process using response surface methods for textile wastewater treatment. International Journal of Civil Engineering, 43(09): 766-774. Published by Springer International Publishing AG. Scopus Indexed. Available online at https://etj.uotechnology.edu.iq/journal/vol43/iss9/3/
iii. Olanipekun A. J., Nuga, O. O., Ismaila, S. O., and Okeke, H.S. (2025). A Review of the Different Trends on Induction Motor Research. Journal of Engineering for Development, 17(3):88 – 98. Published by Faculty of Engineering, University of Benin. Available online at https://jedev.com.ng/wp-content/uploads/2025/10/JED-V17-03-09-09-25.pdf
iv. Olanipekun, A.J., Nuga, O.O., Matthew, S., Aro, E.O., and Akinrotimi D. (2025). Wireless-Based Clearance System Using NFC Technology: A Case Study of Federal University of Agriculture, Abeokuta. Journal of Engineering for Development, 17(3):201– 219. Published by Faculty of Engineering, University of Benin. Available online at https://jedev.com.ng/wp-content/uploads/2025/11/JED-V17-03-16-09-25.pdf
v. Nuga O.O., Olanipekun A.J., Amusa K.A., Adebisi O.I., Akinola O.A., Matthew S., Adedokun J.L., Ojo P.O., Lawal A.O. and Owusu S.B. (2025). Development of a Fast-Charging Hybrid Portable Power Bank. APWEN Journal of Engineering Science and Technology (AJEST), 8(1): 75-85. Published by Association of Professional Women Engineers of Nigeria (APWEN).
vi. Olanipekun A. J., Nuga O. O., Matthew S., John O. M., Onabanjo P. O., Olamiju O. O. (2025). Development of a Voltage Controlled Battery Multi-Charging System. APWEN Journal of Engineering Science and Technology (AJEST), 8(1): 148-157. Published by Association of Professional Women Engineers of Nigeria (APWEN).
vii. Orovwode H., Matthew S., Adebisi O.I., Olanipekun A.J., Amuta E.O. (2024). Development of a solar system for charging mobile phones with customized DC chargers for rural areas in Nigeria. International Journal Systematic Innovation, 8(1), 63-69. Published by The Society of Systematic Innovation, Taiwan. Scopus Indexed.
viii. *Olusanya S.T., Wara S.T., Adejumobi I.A. and Olanipekun A.J. (2024). Development of a Tier 1 Transformer Condition Index Calculator. APWEN Journal of Engineering Science and Technology, 7(1): 89-97. Published by Association of Professional Women Engineers of Nigeria (APWEN).
ix. *fOrovwode H., Matthew S., Amuta E., Olanipekun A.J. and Thompson T. (2024). Fabrication and investigation of local clay-based insulators for high voltage applications, Cogent Engineering, 11(1): 1-8, 2327903. Published by Informa UK Limited, trading as Taylor & Francis Group. Scopus Indexed.
x. *fNuga O.O., Amusa K.A., Olanipekun A.J., Matthew S. (2024). Quantized Consensus of Finite-Level Multi-agent Networked Systems. International Journal of Advances in Applied Sciences (IJAAS), 13(1):148-159. Published by IEAS. Scopus Indexed.
xi. *Olanipekun A.J., Nuga O.O., Matthew S. and Olamiju O.O. (2024). Development of a Voice Controlled Robotic Vehicle to Enhance Human-robot Interaction. APWEN Journal of Engineering Science and Technology, 7(1): 111-121. Published by Association of Professional Women Engineers of Nigeria (APWEN).
xii. Nuga O.O., Olanipekun A.J., Nwaorgu O.G.F., Matthew S., Anyanwu B.U., Amusa K.A. (2023). Ethics: An obligation for Engineering and Scientific Societies. International Journal of Basic Science and Technology (IJBST), 9(2):122-117. Published by Faculty of Science, Federal University, Otuoke, Bayelsa State.
xiii. Amusa K.A., Olanipekun, A.J., Erinosho T.C., Salaam A.A., Razaq S.S. (2023) Development of a PC-based sign language translator, International Journal of Informatics and Communication Technology (IJ-ICT). 12(1):177-185. Published by the Institute of Advanced Engineering and Science (IAES), Indonesia. Scopus Indexed.
xiv. Olanipekun A.J., Akinboro F.G., Nuga O.O., Matthew S., Egberinde O.G. (2022). Development of a Demand Side Smart Energy Control Meter. International Journal of Basic Science and Technology, 8(3):233-242. Published by Faculty of Science, Federal University, Otuoke, Bayelsa State.
xv. Olanipekun A.J., Amusa K.A., Nuga O.O., Matthew S., Aikulola B.O. (2022). Bus Pass System Development using Radio Frequency Identification (RFID). International Journal of Basic Science and Technology (IJBST), 8(3):224-232. Published by Faculty of Science, Federal University, Otuoke, Bayelsa State.
xvi. Amusa K. A., Adewusi A. and Olanipekun A. J. (2018). Development of Infrared-Based Low Cost Bidirectional Counter. FULafia Journal of Science & Technology. 4: 10-16, Special Edition. Published by Federal University Lafia.
xvii. Olanipekun A. J., Olanipekun M. U., Amusa K. A., and Olajide K. O. (2018). Modelling and Real Time Performance Study of Photovoltaic Array. Umudike Journal of Engineering and Technology (UJET), 4(2): 12-18. Published by College of Engineering and Engineering Technology, Michael Okpara University of Agriculture Umudike.
Last Updated:
