B.Eng, M.Eng.(Ilorin), Ph.D. (Germany)

*    The kernel of my research work is in Fluid Dynamics, Flow Stability and Control, Heat and Mass Transfer; Computational Fluid Dynamics, Solar Energy

CURRENT RESEARCH ACTIVITIES

Research in Progress – Manuscripts in Preparation

(i) Renewable energy prospect and utilization in Nigeria
(ii) Simulation of the operation of internal combustion engines.
(iii) Simultaneous heat and mass transfer processes of bubble by vapour absorption at intermediate Reynolds numbers
(iv) Combustion of sodium droplets at intermediate to high Reynolds numbers
(v) Control of the environmental pollution through exhaust gas recirculation
(vi) Natural convection in rectangular enclosures filled with power-law fluid.
(vii) Control of the onset of convection in Darcy-Benard configuration (in collaboration with Dr. Andrew Rees, Mechanical Engineering Department, University of Bath, UK)
(viii) Heat Transfer Induced by a Hot Plate Moving through the Mid-Horizontal Plane of Rectangular Enclosures Filled with Nanofluids (in collaboration with Prof. Ali Chamkha, Department of Mechanical Engineering, Kuwait University, Safat, Kuwait)
(ix) Combined Radiation and Natural Convective Heat Transfer in Triangular Enclosures Using Heat Function Formulation Approach (in collaboration with Antonio Campo, Department of Mechanical Engineering, The University of Vermont, USA)
(x) Heat function analysis of forced convection heat transfer in rectangular channel occupied by a fluid with temperature-dependent viscosity, (in collaboration with Prof. Kamel Hooman, School of Engineering, The University of Queensland, Brisbane, Australia)

*     Science Prize from the Ogbomoso Ajilete Group, 1982
*    University Scholar as the best student in the Mechanical Engineering Department; University of Ilorin, 1987 – 1990.
*    University Prize as the best Graduating Student in the Mechanical Engineering Department; University of Ilorin, November 1990.
*    German academic exchange service (Deutscher Akademischer Austauschdienst, DAAD) Scholarship for PhD in Mechanical Engineering at Aachen University of Technology (RWTH), Aachen, Germany October 1996 – July 2001.
*    Commonwealth Fellowship at the Department of Mechanical Engineering, University of Bath, Claverton Down, Bath, BA2 7AY, United Kingdom, January – June, 2008.

Deputy Vice Chancellor (Academic)

*    Corporate Member, Nigerian Society of Engineers (MNSE) with Membership number 12,794.
*    Full registration with the Council for the Regulation of Engineering Practice in Nigeria (COREN) with registration number RN. 10,046.

Paper Presented At Conference(s) Attended Conference(S) /Workshop/Short Courses Attended:
1    Short Courses on “Modelling of Multiphase Flows; Part I – Bases, Part II – Computational Modelling” Hosted by the Federal Institute of Technology, (ETH) Zurich, Switzerland, March 16 – 20, 1998.

2    Working session of experts of society of process technique and chemical engineering “CFD – Computational Fluid Dynamics”, “Multiphase flow” and the ADMIRE Dissemination Seminar, in Bamberg, Germany 28th February – 1 March 2000.

Paper Presented:
M. A. Waheed, M. Henschke, A. Pfennig: Simulation of the fluid dynamics and the mass transfer of sedimenting single drop (in German), paper V/D 4.11.

3     ACHEMA 2000– The 26th Exhibition – Congress – International Meeting on Chemical Engineering, Environmental Protection and Biotechnology at Frankfurt am Main, Germany, 22nd – 27th May, 2000.

Poster:
M. Henschke, M. A. Waheed, S. Klinger: Design of Extraction Column (in German)

4    World Engineers’ Convention with the theme: “Mankind – Nature – Technology”; EXPO 2000 in Hannover, Germany; 18th – 21st June 2000.

5    Working session of experts of society of process technique and chemical engineering “CFD Computational Fluid Dynamics” and “Mixing Process“ in Wernigerode, Germany 1st – 2nd March, 2001.

Paper Presented:
E. Groß-Hardt, M. A. Waheed, M. Henschke, A. Pfennig: On the numerical analysis of mass transfer of single drop, paper V/D 1.16

6    The 13th Engineering Assembly of the Council for the Regulation of Engineering in Nigeria (COREN), 21st – 22nd September, 2004 at the International Conference Centre, Abuja
Theme: National Economic Empowerment and Development Strategy (NEEDS): Challenges to Engineering

7    Workshop to Develop Minimum Academic Standard for Postgraduate Diploma Students in Engineering organised by the Council for the Regulation of Engineering in Nigeria (COREN) at Obafemi Awolowo University, Ile-Ife, 16th – 17th May, 2005

8    The 15th Engineering Assembly of the Council for the Regulation of Engineering in Nigeria (COREN), 25th – 26th July, 2006 at the International Conference Centre, Abuja
Theme: Issues of Engineering Regulation in Nigeria

9.    The 1st National Technology Fair, 5th – 6th March, 2007, at Bells University of Technology, Ota
Theme: Energy and Technology Development.

10.    The 1st Conference and Exhibition on Technical and Vocational Education (IVTC 2007), 28th – 30th March, 2007 at Abuja Sheraton Hotel and Tower

11.    Theme: Showcasing the best of Technical and Vocational Education in Africa Commonwealth Day Celebration at St Johns Church of England Primary School, Midsomer Norton, Radstock, United Kingdom, 10th March, 2008

Paper Presented:
Nigeria: A Land of Great Potentials and Wide Diversities

12.    British Applied Mathematics Colloquium 2008, School of Mathematics, the University of Manchester, United Kingdom, March 31st to April 3rd, 2008.

13.    Interfaith Relations organised by the Commonwealth Scholarship Commission at Cumberland Lodge, Windsor Park, Egham, United Kingdom, 11 – 13 April, 2008.

14. The 19th Engineering Assembly of the Council for the Regulation of Engineering in Nigeria (COREN), 3rd – 4th August, 2010 at the International Conference Centre, Abuja

Theme: Nigeria at 50: Challenges of Sustainable Engineering Infrastructural Development

15. University System Annual Review Meeting Held at National Universities Commission (NUC) Headquarters, Abuja on the 14th September, 2010

16. The 2010 International Conference on Sustainable Development and Environmental Protection Held at Bells University of Technology, Ota, Between 21st and 23th September, 2010

17. Workshop and Annual General Meeting of the Committee of Directors of Academic Planning of Nigerian Universities (CODAPNU) held at the University of Ilorin, Ilorin between 26th and 27th October, 2010

Theme: Research and National Development: Challenges and the Way Forward.

18. Seminar Held on the 10th November, 2010 at the University of Ilorin on Changing Nature of Doctoral Programmes in Sub-Saharan Africa

19. Workshop on Capacity Building in Entrepreneurship Education and Practice for Universities in Nigeria, Held at Covenant University, Ota, March 29-30, 2011

20. Advanced Digital Appreciation Programme for Tertiary Institutions (ADAPTI) Training at Digital Bridge Institute, Lagos between 1st and 5th August, 2011.

21. The 15th Annual International Education Association of South Africa (IEASA) Conference Hosted by the Durban University of Technology, South Africa between 31st August and 3rd September, 2011

Theme: The Impact of Internationalisation on the Quality of Higher Education

22. Training Programme on the First Institutional Accreditation of Nigerian Universities at National Universities Commission (NUC) Headquarters, Abuja on the 26th September, 2011

23. University System Annual Review Meeting Held at National Universities Commission (NUC) Headquarters, Abuja on the 10th October, 2011

24. Conference and Annual General Meeting of the Committee of Directors of Academic Planning of Nigerian Universities (CODAPNU) held at the National Open University, Victoria Island, Lagos between 25th and 27th October, 2011

Theme: Research and National Development: Challenges and the Way Forward.

(a)    Thesis/Dissertation
i    Waheed, M. A.: Computer simulation of the operations of a single cylinder four-strokes cycle spark- ignition engine, July 1990, degree project report, University of Ilorin.

ii    Waheed, M. A.: Natural convection in rectangular enclosures with one thermally active and differentially heated vertical side, March 1995, Master thesis, University of Ilorin.

iii    Waheed, M. A.: Fluid dynamics and mass transfer by free and forced convection of liquid drops (written in German), March 2001, Ph.D thesis, Aachen University of Technology (RWTH), Aachen, Germany. URL: www.sfb540.rwth-aachen.de/Publications/Author/WAHEED-MA.php

(b)    Book/Monographs
1.    Adebiyi K. A., Waheed, M. A. and Mudashiru, L. O. (2008). Basics of Strength of materials. Keller Prints Production, ISBN: 978-978-49152-0-5.

2.    Jekayinfa, S. O. and Waheed, M. A. (2008). Selected fuel properties of biodiesel produced from shea butter oil and palm kernel oil, in Adebooye O. C., Taiwo, K. A., Fatufe, A. A. (Eds.), Food, Health and Environmental Issues in Developing Countries: The Nigerian Situation, Cuvillier Verlag, Göttingen, pp. 326 – 334.

3.    Waheed M. A., Adebiyi K. A. and Onawumi A. S. (2007). Fundamentals of Maintenance Engineering, Wole-Alabi Blessed Press, ISBN: 978-2902-28-4.

4.    Olafimihan, E. O., Onawumi, A. S. and Waheed, M. A. (2004). Worked examples and practice problems with answers n engineering mechanics. Emola-Jay Communications Inc. Ibadan,  ISBN: 978-196-102-3.

5.    Waheed, M. A., Jekayinfa, S. O. and Adebiyi, K. A. (2004). Introductory fluid mechanics. Emola-Jay Communications Inc. Ibadan. ISSN: 978-006-506-7.

6.    Waheed, M. A., Jekayinfa, S. O. and Olafimihan, E. O. (2003). Strength of materials for beginners. Emola-Jay Communications Inc. Ibadan. ISSN: 978-006-391-9.

7.    Waheed, M. A. (2001). Fluid dynamics and mass transfer by free and forced convection of liquid drops, Shaker Press, Aachen, Germany. ISBN 3-8265-8962-9; ISSN 0945-1021 (in German).

(c)    Published Articles

I.    Journal Articles
8.    Waheed, M. A. (1999). Simulation of fluid dynamics and mass transfer of a drop, TVT-Akzente, 1 Jahrgang, 1999, pg. 8 – 9 (in German, English translation attached).

9.    Henschke, M., Waheed, M. A. and A. Pfennig (2000). Wall effect on the sedimentation of sphere; Chem. Ing. Tech. Vol. 72(11), pg. 1376 – 1380 (in German, English translation attached).

10.    Waheed, M. A. and. Gross-Hardt, E (2000). Simulation of flow processes of a single drop, TVT-Akzente, 2 Jahrgang, pg. 10 – 11 (in German, English translation attached).

11.    Waheed, M. A., Henschke, M. and A. Pfennig (2002). Mass transfer by free and forced convection of a liquid drop, International Journal of Heat and Mass Transfer, vol. 45, 4507 – 4514.

12.    Waheed, M. A (2003). Natural convection in rectangular enclosures with one thermally active and differentially heated vertical side. Journal of Applied Science and Technology, vol. 3(2), 1 – 7.

13.    Waheed, M. A. (2003). The Phenomenon of wakes formation and development behind liquid droplets. LAUTECH Journal of Engineering and Technology, vol. 1(1), 6 – 16.

14.    Waheed, M. A. (2003). The effect of fluid transport properties on the inner and outer flow of a sedimenting drop, Journal of Science Engineering and Technology, vol. 10(2), 4909 – 4925.

15.    Waheed M. A. (2004). On the heat function formulation of the natural convective flow and heat transfer LAUTECH Journal of Engineering and Technology. Vol. 2 (1): 30 – 35.

16.    Waheed, M. A., Henschke, M. and Pfennig A. (2004) Simulating sedimentation of liquid drop. Int. J. Numer. Meth. Engng., vol. 59, 1821 – 1837.

17.    Alamu, O. J., Aiyedun, P. O. and Waheed, M. A. (2004). Simulation of the type 316 stainless steel deformation during hot Rolling using the Zener-Hollomon parameter.  LAUTECH Journal of Engineering and Technology. Vol. 2 (1): 47 – 55.

18.    Jekayinfa, S.O., Adebiyi, K.A., Waheed, M.A. and Owolabi, O.O. (2005). Appraisal of farm tractor maintenance practices and costs in Nigeria. International Journal of Quality in Maintenance Engineering. UK vol. 11(2): 152 – 168.

19.    Jekayinfa, S.O., Waheed, M.A., Adebiyi, K.A. and Adebiyi, F.T. (2005). Effect of cassava fluid on corrosion performance of mild steel. Journal of Anti Corrosion Methods and Materials vol. 52(5): 286 – 292.

20.    Waheed, M. A. and Jekayinfa, S. O. (2005). Review of solar powered refrigeration system for rural dwellers. International Journal of Applied Agricultural and Apicultural Research (IJAAAR). Vol. 1 (1): 74 – 86

21.    Ogunleye, O.O., Waheed, M.A., and Odewole, G.A.  (2005). Optimal allocation of pipe diameters in pipe networks using modified assignment problem approach, LAUTECH Journal of Engineering and Technology. vo1. 3 (1): 76 – 81.

22.    Waheed, M. A. (2006). Temperature dependent fluid properties effects on the heat function formulation of natural convective flow and heat transfer. International Journal of Numerical Methods for Heat and Fluid Flow, vol. 16(2), 240 – 260.

23.    Adebiyi, K. A., Waheed, M. A. and Charles-Owaba, O. E. (2006). An empirical analysis of airways safety in Nigeria, Journal of Research in Engineering, vol. 3(2), 18 – 25.

24.    Adebiyi, K. A., Charles-Owaba, O. E and Waheed, M. A. (2007). Safety performance evaluation models – a review, International Journal of Disaster Prevention and Management, vol. 16, No. 2, pp. 178 – 187.

25.    Alamu, O.J., Waheed, M.A. and Jekayinfa, S.O. (2007). Alkali-catalysed Laboratory Production and Testing of Biodiesel Fuel from Nigerian Palm Kernel Oil Agricultural Engineering International: the CIGR – E – Journal. Manuscript EE 07 009 Vol.IX.

26.    *Alamu, O.J., Waheed, M. A. and Jekayinfa, S.O. (2007). Biodiesel Production from Nigerian Palm Kernel Oil: Effect of KOH Concentration on Yield. Journal of Energy for Sustainable Development, vol. XI, No 3, pp. 77 – 82.

27.    *ObaniJesu E.O., Waheed M.A. and Macaulay S.R.A. (2007), West African Gas Pipeline (WAGP) Project: The Prospects, Associated Problems and Possible Remedies, LAUTECH Journal of Engineering, vol. 4(2), pp. 60 – 68.

28.    *Durowoju M. O. and Waheed M. A. (2007). A measurement of porosity in aluminium A356 cast alloy using fractal analysis, Science Focus, an International Journal Biological and Physical Sciences, vol. 12(2), pp. 157 – 165.

29.    *Ayeni O. B. and Waheed M. A. (2007). The interaction of thermal ignition, explosion, natural convection, forced convection and species consumption in a carburettor, Science Focus, an International Journal Biological and Physical Sciences, vol. 12(2), pp. 172 – 180.

30.    *Alamu, O. J., Aiyedun, P. O., Kareem, A., Waheed, M. A. (2007).  Effect of AISI316 stainless steel geometry on temperature distribution during hot rolling at high reduction, Advanced Materials Research, vols. (18 – 19), 195 – 200.

31.    *Alamu, O.J., Waheed, M. A., Jekayinfa, S.O. and Akintola, T.A. (2007). Optimal Transesterification Duration for Biodiesel Production from Nigerian Palm Kernel Oil, Agricultural Engineering International: CIGR Ejournal. Texas, USA, EE 07 018. Vol. IX. December, 2007

32.    *Alamu, O.J., Waheed, M.A. and Jekayinfa, S.O. (2008). Effect of Ethanol-Palm kernel oil Ratio on Alkali-catalysed Biodiesel Yield, Fuel; The Science and Technology of Fuel and Energy, 87(8-9): 1529-1533

33.    *Waheed, M. A., Jekayinfa, S. O., Ojediran, J. O. and Imeokparia, O. E. (2008). Energetic analysis of fruit juice processing operations in Nigeria, The International Journal of Energy, 33 (1), 35 – 45.

34.    *Waheed M A. (2008). An approach to the simulation of natural convective heat transfer between two horizontal cylindrical annuli, Numerical Heat Transfer, Part A, 53: 323–340.

35.    *Enweremadu C. C., Waheed M. A., Adekunle A. A., Adeala A. (2008). The energy potential of brewer’s spent grain for breweries in Nigeria, Journal of Engineering and Applied Sciences, vol. 3 (2), 175 – 177.

36.    *Enweremadu C. C., Waheed, M. A., Ojediran, J. O. (2008). Parametric study of pressure increase across a compressor in ethanol-water vapour recompression distillation column, Scientific Research and Essay, vol. 3(9), 231 – 241.

37.    *Waheed, M. A. (2009). Heatfunction Formulation of Thermal Convection in Rectangular Enclosures Filled with Porous Media, Numerical Heat Transfer, Part A, Vol. 55 No. 2, pp. 185 – 204.

38.    *Alamu, O.J., Waheed, M. A. and Jekayinfa, S.O. (2009). Determination of Optimum Temperature for the Laboratory Preparation of Biodiesel from Nigerian Palm Kernel Oil, Energy Sources Part A, USA, vol. 31, pp. 1105–1114.

39.    *Enweremadu C. C., Waheed, M. A., Ojediran, J. O. (2009). Parametric study of an ethanol–water distillation column with direct vapour recompression heat pump, Energy for Sustainable Development, vol. 13, 96–105.

40.    *Waheed, M. A. (2009). Mixed Convective Heat Transfer in Rectangular Enclosures Driven by a Continuously Moving Horizontal Plate, International Journal of Heat and Mass Transfer, vol. 52, pp. 5055–5063.

41.,    Durowoju, M.O, Waheed, M. A., Lucas, E.B. (2009), Application of Fractal Analysis in Evaluating the Pores in Heat-Treated Samples of Al-20%wtMg, The Pacific Journal of Science and Technology, vol. 10(2), pp. 136 – 142,

42. Arulogun, O. T., Fakolujo, O. A., Waheed, M. A., Omidiora, E. O. and Olaniyi, O. M. (2009), A Framework for Electronic Nose Based Condition Monitoring and Diagnosis of Automobile Engine Faults, The Journal of Computer Science and its Application, vol. 16 (2),pp. 31 – 41.

43. Fadare, D. A., Nkpubre, D. O., Oni, A. O., Falana, A., Waheed, M. A. and Bamiro, O. A. (2010). Energy and exergy analyses of malt drink production in Nigeria, The International Journal of Energy, vol. 35(12), 5336 – 5346. URL: http://dx.doi.org/10.1016/j.energy.2010.07.026

44. G. A. Odewole, M. A. Waheed and O. S. Olaoye. (2010). Measurement of Mean Velocity and Reynolds Stress Profiles in a Turbulent Pipe Flow, Science Focus, an International Journal Biological and Physical Sciences, vol. 15(2), pp. 236 – 248.

45. Waheed, M. A., Odewole, G. A., and Alagbe, S. O. (2011). Mixed Convective Heat Transfer in Rectangular Enclosures Filled with Porous Media, ARPN Journal of Engineering and Applied Sciences, vol. 6(8), pp. 47 – 60.

46. Sangotayo, E. O. and Waheed, M. A. (2011). Parametric Study of Heat Characteristics of Fluid in Cylindrical Parabolic Concentrating Solar Collector”. Pacific Journal of Science and Technology. 12(1):152-160.

.47. Odewole, G.A., Waheed, M. A. and Olaoye, O. S. (2011): Experimental Measurement of Heat Transfer Rates in Heated Duct with Inclined Ribs. LAUJET, Vol. 6, Issue 2, pp. 12 – 18. 2.

48. Odewole, G.A., Waheed, M. A. and Olaoye, O. S. (2011): Measurement of Mean Velocity Profile in a Turbulent Pipe Flow – A Numerical Approach. LAUJET, Vol. 7, Issue 1, pp. 1 – 5.3.

49. Ohijeagbon, I.O., Waheed, M. A. and Jekayinfa, S.O. (2011): Annual and Compounded Life Cycle Cost Analysis of Steam Boiler.  LAUJET, Vol.6, Issue 2, pp. 91 – 96

 

II     Conference Proceedings
50.    Alamu, O. J., Aiyedun, P. O., Kareem, A., Waheed, M. A. (2006). Effect of AISI316 stainless steel geometry on temperature distribution during hot rolling at high reduction, Proceeding of the International Conference on Engineering Research and Development: Impact on Industry, 5th – 7th September, 2006, Benin, Nigeria.

51.    Waheed M. A., Alagbe S. O., and Ogunleye O. O., (2006). The applications of CFD in the design and the development of engineering equipment (paper presented at the 19th annual conference of the Nigerian Institution of Mechanical Engineers, Akure, November 08, 2006)

52.    *Obanijesu, E.O, Waheed, M.A and Macaulay, S.R.A. (2007). Prospects and Problems of West African Gas Pipeline (WAGP) Project” (Paper accepted for presentation at the First International Conference on Environment Research, Technology and Policy, Accra, Ghana, July 16 – 19

53.    *Waheed, M. A., Rees, D. A. S. (2008). Heatfunction analysis of the Rayleigh-Bénard problem in porous media, Proceedings of CHT-08, ICHMT International Symposium on Advances in Computational Heat Transfer, May 11-16, 2008, Marrakech, Morocco, paper CHT-08-384

54. Fadare, D. A., Bamiro, O. A., Nkpubre, D. O., Oni, A. O. and Waheed, M.A. (2010). Energy Analysis of Malt Drink Prfoduction in Nigeria, Proceedings of NIIE 2010 Conference, pp. 96 – 103

55. Babatunde, K. A., Alade, A. O., Waheed, M. A., Amuda, O. S. (2010). Determination of Biodiesel Blends Suitable for Automobile Engines from African Star Apple Seed Oil (ASASO), Humboldt-Kolleg International Conference, Ogbomoso, January 11 – 14, 2010, pp. 18.

56. Olaoye, S.O., Waheed, M. A. (2010). Experimental Investigation of the Effects of Geometry on the Performance of Savonius Wind Turbine, Humboldt-Kolleg International Conference, Ogbomoso, January 11 – 14, 2010, pp. 68.

57. Waheed, M. A., Ladokun, L. L. (2010). A Study of the Effects of Some Local Weather Parameters on the Thermal Performance of a Solar Concentrating Collector, Humboldt-Kolleg International Conference, Ogbomoso, January 11 – 14, 2010, pp. 69.

58. Waheed, M. A., Fadare, D. A., Oni, A. O., Sulaiman, M. A. (2010). Simulation of the Household Energy and Exergy Consumption Trend, Humboldt-Kolleg International Conference, Ogbomoso, January 11 – 14, 2010, pp. 70.

59. Fadare, D. A., Oni, A. O. and Waheed, M. A. (2010). Exergetic analysis of atmospheric distillation plant: a case study of WRPC refinery, Proceedings of Faculty of Technology International Conference 2010 held at Conference Centre and Guest Houses Ltd, Obafemi Awolowo University, Ile-Ife between September 5 – 9, 2010, pp. 143 – 151.

60. Waheed, M. A., Lucas, E.B., Durowoju, M.O. (2010), Numerical Characteristion of the Pores in Heat Treated AL-20%WTZN, Proceedings of the First International Conference on Engineering and Technology Research, 28 – 30 September, pp. 58 -63.

61. Waheed, M. A., Odewole, G. A., Alagbe, S. O., Kuye, S. I. and Ismaila, S. O. (2011). Visualization of Buoyancy Induced Heat Flow in Rectangular Enclosures Filled with Nanofluids Using Heatfunction Formulation Approach, Second African Conference on Computational Mechanics – An International Conference – AfriCOMP11, January 5 – 8, 2011, Cape Town, South Africa

62. Oni, A.O., Fadare, D.A., Waheed, M.A., Adewumi, A., Adejobi, O.J. and Sulaiman, M.A. (2011). Exergetic Assessment of a Crude Oil Distillation Plant. Science, Engineering and Technology Conference (SETCONFERENCE, 2011), held at Osun State University, Osogbo, between March 15 and 18, 2011.

63. Sulaiman, M.A., Fadare, D.A., Oni, A.O., Waheed, M.A. and Ajulo, A.O. (2011). Thermodynamic Analysis of Edible Oil Refinery Operations. Science, Engineering and Technology Conference (SETCONFERENCE, 2011), held at Osun State University, Osogbo, between March 15 and 18, 2011.

64. Sangotayo, E.O., Waheed, M.A. and Alamu, O.J. (2011). Parametric Study of Thermal Performance of Cylindrical Parabolic Trough Solar Collector in Ogbomoso Environs. Science, Engineering and Technology Conference (SETCONFERENCE, 2011), held at Osun State University, Osogbo, between March 15 and 18, 2011.

65. Babatunde, K. A., Alade, A.O., Olabode F.I., and Waheed, M.A. (2011). Acid-Catalyzed Production of Biodiesel from Chrysophyllum Albidium Seed Oil. Science, Engineering and Technology Conference (SETCONFERENCE, 2011), held at Osun State University, Osogbo, between March 15 and 18, 2011.

66. Nwaokocha, C.N., Waheed, M.A. and Layeni, A.T. (2011). Extracting Marine Energy to Solve Nigeria’s Energy Crisis. Science, Engineering and Technology Conference (SETCONFERENCE, 2011), held at Osun State University, Osogbo, between March 15 and 18, 2011.

67. Sangotayo, E. O., Waheed, M. A., and Olajide, J. O. (2011). Numerical Investigation of Temperature Dependent Properties of Nanofluid in a Cavity, Humboldt-Kollege, Ogbomoso, 2011, July 4 – 7, 2011.

68 Olaoye, O. S., Waheed, M. A., Odewole, G. A. (2011). Importance of Nanotechnology in Solar Drying, Humboldt-Kollege, Ogbomoso, 2011, July 4 – 7, 2011.

69. Samuel, O. D., Waheed, M. A., Dairo, O. U. (2011). Sustainable biodiesel development strategies in fossil-driven economy – Nigeria, 7th Annual Research Conference & Fair, University of Lagos, 19th – 21st October, 2011.

70. OYELAMI, A.T., ADEJUYIGBE, S.B., WAHEED, M.A. AND OGUNKOYA, A.K. (2010) Performance Evaluation of Blowers of Different Impeller/Vane Profiles. Accepted for the Conference Proceedings of NIMACON 2010.

71. OYELAMI, A.T., ADEJUYIGBE, S.B., WAHEED, M.A. AND OGUNKOYA, A.K. (2010) Performance Evaluation of Blowers of Different Impeller/Vane Profiles. Accepted for the Conference Proceedings of NIMACON 2010.
III    Articles Accepted For Publication
1. Waheed, M. A. and Sangotayo, E. O. (2011). Numerical Investigation of Buoyancy Effect Associated with a continuously Moving Horizontal Plate, Accepted for publication by ASUU Journal.

IV    Paper Submitted For Publication
1.    M. A. Waheed (2007). Variable property effects on heat flow lines of thermal convection within concentric horizontal cylindrical annuli (submitted to International Journal of Heat and Technology)

2.    Jekayinfa, S.O., Waheed, M. A., Ojediran, J.O. and Yomi-Yusuf, O. (2007). Energy and Exergy Analyses of Feed-Mill Production Operations in Nigeria. (Submitted to Energy Efficiency).

3.    Waheed, M. A. (2008): Mixed Convective Heat Transfer in Rectangular Enclosures Filled with Porous Medium Plate (Submitted to Heat and Mass Transfer).